Super-resolution Window
The Super-resolution window uses AI to double the width and height of an image, adding fine detail rather than just making the pixels bigger. Use it to make larger prints from small photos, to improve low-resolution scans you made in the past, or to enlarge a small part of a scan.
Super-resolution works best on photos. For documents and line art, scanning at a higher Input | Scan resolution gives better results. If you can rescan the original, scanning at a higher resolution is always better than enlarging afterward.
Super-resolution requires VueScan Standard or Professional Edition.
- Downloading the model
- Step by step
- Comparing the result
- Enlarging several images
- Controls
- Saving your image
- Tips
Downloading the model
Super-resolution uses an AI model that’s downloaded separately. The first time you choose File | Super-resolution, VueScan asks to download it. The download is about 64 MB and can take a few minutes. After that, Super-resolution opens straight away.
If the download doesn’t work, see How to Use Super-resolution for how to download and install the model by hand.
On macOS 10.15 and later, Super-resolution uses the Mac’s graphics processor and Neural Engine. On Windows, it uses the graphics card when it can. Otherwise it runs on the processor, which is slower.
Step by step
- Choose File | Super-resolution.
- Click Open and choose an image file (JPEG, TIFF, PNG or JPEG-XL), or drag an image file onto the window.
- Wait while VueScan enlarges the image. A progress bar shows how far it has got. Large images can take several minutes.
- Compare the result with a plain enlargement. See Comparing the result.
- Click Save to save the enlarged image.
Super-resolution works with saved image files. To enlarge a scan, save it first, then open the saved file.
To stop while an image is being enlarged, click Close or press Esc.
Comparing the result
When the image is ready, the window shows it split in two. The left side is a plain enlargement of the original, and the right side is the Super-resolution result. Drag the divider to move it across the image.
- Click the image to zoom in on that spot, or scroll with the mouse wheel to zoom in and out.
- Drag the image to move around when zoomed in.
- Double-click or right-click to fit the image in the window and put the divider back in the middle.
Enlarging several images
To enlarge several images at once, select more than one file in the Open dialog, or drag several files onto the window. VueScan enlarges them one after another and saves each one automatically, without asking for a file name.
- Each enlarged image is saved next to the original, with “+2x” added to the file name. For example, “photo.jpg” is saved as “photo+2x.jpg”. Existing files aren’t replaced. If “photo+2x.jpg” already exists, the new file is named “photo+2x_2.jpg”.
- To save the enlarged images in a different folder, click Prefs, then Choose Folder…. To go back to saving next to the originals, click Prefs, then Same as input. This folder is used only for batches, and it’s forgotten when you close the window.
- While a batch is running, a Queue list above the buttons shows each file and whether it’s waiting, being enlarged, done or failed. Choose a finished file in the list to compare it. Choose + Add more… or click Add to add more files to the batch.
- If you close the window before the batch is finished, VueScan asks whether to stop. Files that are already finished are kept.
Controls
| Control | What it does |
|---|---|
| Open or Add | Chooses image files to enlarge. When files are already open, this button is called Add and adds files to the batch. |
| Save | Saves the enlarged image. See Saving your image. |
| Clear | Stops any batch and closes all images, so you can start again. |
| Prefs | Chooses the folder where batches are saved. See Enlarging several images. |
| Close | Closes the window. Pressing Esc does the same. |
Super-resolution always doubles the width and height. There are no other settings.
Saving your image
When you enlarge a single image, click Save to choose a file name and folder. The file name starts as the original name with “+2x” added, in the same folder as the original. You can save as JPEG, TIFF, PNG or JPEG-XL. Your original file isn’t changed.
- The resolution (DPI) saved in the file is the same as the original’s, so the image prints at twice the size. To print at the original size with twice the detail, set the print size in your photo editor or printing program. If the original has no DPI, 300 DPI is used.
- Images are enlarged with 8 bits per color. If you open a 48-bit image, it’s saved as a 48-bit file, but with 24-bit precision. Grayscale images are saved as RGB.
- JPEG files are saved at a fixed quality of 90. For the best quality, save as TIFF or PNG.
- If the width or height is an odd number of pixels, the last row or column is trimmed before enlarging.
Saved images are added to your recent scans.
Tips
- Start with the best image you have. Super-resolution adds detail, but it can’t recover detail that was lost to blur, heavy JPEG compression or noise. Use TIFF or high-quality JPEG files.
- Do any cropping first. Enlarging only the part you need is faster and uses less memory.
- To enlarge by four times, enlarge the image, then open the “+2x” file and enlarge it again. Each pass takes four times as long as the one before.
- Very large images need a lot of memory. An image of 24 megapixels needs about 1.5 GB or more. Saved images can’t be wider than 65,536 pixels.