Touch Up Window
The Touch Up window removes small imperfections, such as dust spots, scratches, hairs and stains, from a scan or an image file. You paint over each mark with a brush, and VueScan fills it in with detail from the surrounding area.
Touch Up doesn’t find marks for you. To remove dust and scratches automatically while scanning film, use Filter | Infrared clean if your film scanner has an infrared channel, or Filter | Grain reduction for fine noise. Use Touch Up for the marks that are left.
Touch Up requires VueScan Standard or Professional Edition.
Opening the Touch Up window
There are two ways to open Touch Up:
- The Touch Up button. After a preview or scan, click this button to open the image you just scanned. VueScan uses the scan if there is one, or the preview if not. The image is cropped to the crop box, and Input | Rotation and Input | Mirror are applied, so it looks the same as in the main window.
- File | Touch up. This opens an empty Touch Up window. Click Open to choose an image file (JPEG, TIFF, PNG or JPEG-XL), click Scan to use the image currently shown in VueScan, or drag an image file onto the window.
Step by step
- Open an image in the Touch Up window.
- Zoom in on the area you want to fix. Click + or pinch on a trackpad, then scroll to move around the image.
- Set the Brush slider so the brush is a little larger than the mark you’re removing.
- Paint over the mark. The area you paint turns yellow. When you release the mouse button, VueScan fills it in.
- If the result isn’t right, click Undo and try again with a smaller brush, a shorter stroke or a different mode.
- Repeat for each mark. Press and hold Show Original to compare with the original image.
- Click Save to save the cleaned image.
Choosing a mode
The Mode list sets how VueScan fills in the areas you paint:
- Good / Fast fills in the area by blending the colors around it. It’s instant and works well for small spots on smooth areas such as sky or skin.
- Better / Slower uses AI to fill in the area with matching texture and detail. It works better on larger marks and on textured areas such as grass, hair or fabric.
- Best / Slowest uses a larger AI model for the most natural results. It’s available on macOS 10.15 and later.
The first time you use Better / Slower or Best / Slowest, VueScan asks to download the model. This is a one-time download that can take a few minutes. If you choose not to download it, your brush stroke is discarded. After the model is downloaded, Better / Slower is the default mode.
While an AI fill is running, the stroke pulses yellow and “Processing…” is shown. Wait for it to finish before painting again. Strokes painted while VueScan is processing are ignored.
If VueScan detected that the scan is a document, Touch Up fills painted areas with the paper color instead, and the Mode list isn’t shown. This removes marks such as stains or hole punches without smearing nearby text.
Controls
| Control | What it does |
|---|---|
| Brush | Sets the brush size, from 3 to 50 pixels. The size is measured in image pixels, so the brush covers the same part of the image at any zoom. When you open an image, the size is set to suit the image. |
| Mode | Chooses how painted areas are filled. See Choosing a mode. |
| −, + and Fit | Zoom out, zoom in, and fit the whole image in the window. You can zoom in up to 600%. Right-click the image to fit it in the window. |
| Undo and Redo | Undo or redo the last 20 brush strokes. You can also press Ctrl+Z (Cmd+Z on macOS) and Ctrl+Shift+Z (Cmd+Shift+Z). |
| Show Original | Press and hold to show the image before your changes. Release to show the touched-up image. |
| Save | Saves the touched-up image. See Saving your image. |
| Clear | Closes the current image so you can open another. |
| Close | Closes the Touch Up window. Pressing Esc does the same. |
To move around a zoomed image, scroll with the mouse wheel or trackpad, or drag with the middle mouse button.
If you have unsaved changes when you close the window, open another image or click Clear, VueScan asks whether to save them first. A dot after “Touch Up” in the window title means there are unsaved changes.
Saving your image
Click Save to choose a file name and folder. The folder starts as Output | Default folder, and the file name ends in “-touchup”, so your original file isn’t replaced unless you choose its name. You can save as JPEG, TIFF, PNG or JPEG-XL. The file type starts out the same as the original.
You can keep working after saving and save again. Saved images are added to your recent scans.
Touch Up edits images with 8 bits per color. If you open a 48-bit image, it’s saved as a 48-bit file, but with 24-bit precision. To keep full precision for later editing, scan with Output | Raw file as well, and use Touch Up on a copy. JPEG files are saved at a fixed quality of 90. Grayscale images are saved as RGB.
Tips
- Fix marks with several short strokes rather than one long one. The AI modes work on the area around each stroke, and very long strokes lose detail.
- Cover the whole mark, with a little margin. Any part of the mark left unpainted may be copied into the fill.
- Remove as much dust as possible before scanning. Clean the glass or film with a blower brush. Touch Up is best for the few marks that are left.
- For film with many dust spots, try Filter | Infrared clean first, if your scanner supports it.