Stitch Images Window

The Stitch Images window combines several overlapping scans into one image. Use it for originals that are larger than your scanner glass, such as posters, maps, newspapers, children’s artwork or scrapbook pages. Scan the original in overlapping sections, then stitch the sections together.

Stitch Images requires VueScan Standard or Professional Edition.

Scanning the sections

Stitch Images works with saved image files, so scan and save each section first. Good stitching starts with good scans:

  • Overlap each section by about a quarter. VueScan lines up the sections by finding the same details in the overlapping areas. More overlap gives it more to match.
  • Use the same settings for every section. Stitch Images doesn’t even out differences in brightness or color between sections, so they need to match when you scan them. With Professional options, scan the first section, then set Input | Lock exposure and Input | Lock image color so the rest are scanned the same way. These options are shown only if your scanner can control its exposure.
  • Use the same resolution for every section. Keep Input | Scan resolution the same for all of them.
  • Keep the original flat and move it as little as possible. Small shifts and rotations between sections are fine. Bends and wrinkles are not, because they change the shape of the image in the overlapping areas.
  • Save each section with a numbered file name, so they’re easy to add in order. Output | Auto file name does this automatically.
  • Save as TIFF or high-quality JPEG. Smooth areas with little detail, such as blank paper or sky, are hard to match. Overlaps with text, lines or texture stitch best.

Step by step

  1. Choose File | Stitch images. The Stitch Images window opens.
  2. Click Add Image and choose the first section. It’s shown in the window.
  3. Click Add Image again and choose the next section. VueScan finds where it overlaps the image so far and joins it on. The window shows the combined image.
  4. Repeat for each section. Each new section only needs to overlap some part of the image so far, so you can work along a row and then add the next row.
  5. Click Save to save the stitched image.

You can also drag image files onto the window, one at a time. You can select several files in the Add Image dialog, but adding one at a time lets you check each step and see right away if a section doesn’t fit.

Stitching a large image can take a while, and the window doesn’t respond until it’s finished.

Controls

Control What it does
Add Image Adds one or more image files (JPEG, TIFF, PNG or JPEG-XL) to the stitched image.
Clear Removes all images so you can start again. There’s no undo, and you can’t remove just the last image.
Save Saves the stitched image. See Saving your image.
Help Opens How to Stitch Scanned Images in your web browser.
Close Closes the window. Pressing Esc does the same.

Closing the window discards the stitched image without asking. Save it first.

Saving your image

Click Save to choose a file name and folder. The file name starts as “stitched.jpg” in the folder of the last image you added. You can save as JPEG, TIFF, PNG or JPEG-XL by choosing the file type or typing the file extension.

  • The stitched image is saved with 8 bits per color. 48-bit TIFF files are reduced to 24-bit, and grayscale images are saved as RGB.
  • JPEG files are saved at a fixed quality of 90. For the best quality, save as TIFF or PNG.
  • The resolution (DPI) saved in the file is taken from the first image you added.
  • Your original files aren’t changed.

You can keep adding images after saving and save again. Saved images are added to your recent scans.

If stitching fails

If VueScan can’t join a section, it shows “Error” and leaves the stitched image as it was before that section. The usual causes are:

  • Too little overlap. Rescan the section so it overlaps the image so far by at least a quarter.
  • Too little detail in the overlap. Blank or very smooth areas can’t be matched. Rescan so the overlap includes text, lines or texture.
  • The section doesn’t overlap the image so far. Add the sections in an order where each one overlaps one already added.
  • Different scan settings. Sections scanned at different resolutions or with very different color are harder to match.
  • Not enough memory. Very large stitched images need a lot of memory. Try a lower scan resolution.

For more tips, see How to Stitch Scanned Images.